MacDon R116, Unloading And Assembly Instructions

Page: 120 / 234

214713
112
Revision A
5.8 Discharge Shield (No Conditioner)
•
If a conditioner is being installed, the discharge shield needs to be removed. Refer to 5.8.1 Removing Discharge
Shield (No Conditioner), page 112 .
•
If a conditioner is being removed, the discharge shield needs to be installed. Refer to 5.8.2 Installing Discharge
Shield (No Conditioner), page 114 .
5.8.1 Removing Discharge Shield (No Conditioner)
Follow these steps to remove the shielding installed on a mower configured without a conditioner:
1015037
B
A
Figure 5.45: Mower with Transport
1. Raise the mower fully and extend the center-link to
maximize the space between shield (A) and carrier
frame (B).
1023734 1023734
A
Figure 5.46: Lift Cylinder Lock-Out Valves
2. Close lift cylinder lock-out valves (A) on both sides of
the mower. Valve handles should be in the closed
position (90 degree angle to the hose).
SETTING UP THE TRACTOR