214735
57
Revision A
1023033
A
B
Figure 4.22: HPT Header Disengaged Screen
9.
Turn the IGNITION switch to crank (A).
NOTE:
When the engine starts and the header is not engaged,
the HPT will display the header disengaged screen (B).
IMPORTANT:
•
Do
NOT
operate starter for longer than 15 seconds
at a time.
•
If engine does not start, wait at least 2 minutes
before trying again.
•
If you crank the engine for more than 30 seconds
within a 2-minute period, the engine will lock the
starter circuit to prevent overheating, and a flashing
WTS symbol will illuminate on the HPT display. Wait
for the WTS symbol to stop flashing before
attempting to crank engine again.
•
If engine still does not start, refer to
1019655
A
Figure 4.23: HPT No Header Screen
NOTE:
When the engine temperature is below 5°C (40°F), the
engine will cycle through a period where it appears to
labor until the engine warms up. Do
NOT
operate engine
above 1500 rpm until the HPT engine temperature gauge
is above the blue range (A).