214735
22
Revision A
5.
Position wheel to line up holes in rim with studs on hub
and push wheel onto hub.
1011218
A
1
3
4
5
6
7
8
9
10
2
Figure 3.12: Tightening Sequence
6.
Install wheel nuts (A).
IMPORTANT:
To avoid damage to wheel rims and studs, do
NOT
use
an impact wrench. Threads must be clean and dry. Do
NOT
apply lubricant or anti-seize compound. Do
NOT
overtighten the wheel nuts.
7.
Torque drive wheel nuts to 510 Nm (375 lbf·ft) using the
tightening sequence shown.
IMPORTANT:
Use only manufacturer-specified nuts (MD #205397).
8.
Repeat tightening sequence two additional times,
ensuring the specified torque is achieved each time.
9.
Lower jack and move away from work area.
10. Raise windrower, remove stand, and lower windrower to ground.
11. Repeat Steps
to
for the other drive wheel.
12. Repeat torque procedure every hour of operation until two consecutive checks confirm that there is no
movement of the nuts.