214735
21
Revision A
3.3
Installing Drive Wheels
IMPORTANT:
Windrower must be supported off the ground with stands.
1022781
A
B
C
Figure 3.10: Supporting Windrower
1.
Using a forklift, lift cab-end of windrower to
approximately 130 cm (51 in.) (B) off the ground,
enough to position the drive wheel assembly (A). Place
a stand (C) under windrower frame.
2.
Clean mounting surface on wheel drive and rim.
1022892
A
C
B
Figure 3.11: Drive Wheel
CAUTION
Use a lifting device capable of supporting a minimum of
907 kg (2000 lb.) to lift the wheel assembly.
3.
Position pallet jack (A) or equivalent under tire and raise
slightly.
4.
Locate drive wheel against the wheel drive hub so
air valve (B) is on the outside and the tire tread (C)
points forward with the windrower in cab-forward
orientation.
NOTE:
For turf tires (diamond tread pattern), be sure arrow on
sidewall points in forward rotation with windrower in
cab-forward.