214735
38
Revision A
1013204
A
Figure 3.42: Engine Compartment
9.
Grasp hood by louver (A) and lower until hood
engages latch.
1022921
A
E
B
C
D
E
E
F
F
Figure 3.43: Weights Installed
CAUTION
To avoid injury, keep fingers clear of weight bracket
when installing weights.
10. Install weights (A) from outboard side and slide to
middle of bracket on walking beam.
11. Install retaining bracket (B) on each side of weight
bundle.
IMPORTANT:
Ensure retaining bracket (B) engage slot (C) in bracket.
12. Install rod (D) through retaining bracket and weights
with spacers (E) as required.
13. Secure with nuts (F) and tighten.
IMPORTANT:
Ensure nuts (F) are flush with rod.
1018705
A
B
C
D
E
Figure 3.44: Base Kit
–
163 kg (360 lb.)