214735
76
Revision A
4.5
Attaching Headers to M1 Series Windrower
4.5.1
A40DX Auger Header
Attaching an A40DX Auger Header
CAUTION
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
1022271
A
B
C
Figure 4.56: Header Support
1.
Remove hairpin (A) from pin (B), and remove pin from
header supports (C) on both sides of header.
IMPORTANT:
Remove protective cover from exhaust stack prior to
starting engine.
CAUTION
Check to be sure all bystanders have cleared the area.
2.
Start engine.
1015853
Figure 4.57: Header Float Springs
CAUTION
When lowering header lift legs without a header or
weight box attached to the windrower, ensure the float
springs tension is fully released to prevent damage to
the header lift linkages.
NOTE:
If not prompted by the Harvest Performance Tracker (HPT)
display to remove float, remove float manually by doing the
following:
