214735
45
Revision A
4
Performing Predelivery Checks
Perform all procedures in this chapter in the order in which they are listed.
IMPORTANT:
The machine should not require further adjustments; however, perform the following checks and complete the
yellow predelivery checklist at the end of this book to ensure your machine operates at maximum performance.
Make adjustments only if absolutely necessary and in accordance with the instructions in this manual.
4.1
Completing Predelivery Checklist
1.
Lower header so that lift cylinders are fully retracted.
2.
Shut down engine, and remove key.
3.
Perform the final checks and adjustments listed on the following pages and the
Predelivery Checklist, page 129
(yellow sheet attached to this instruction) to ensure the machine is field-ready.
IMPORTANT:
Ensure the Operator or the Dealer retains the completed Predelivery Checklist.
4.1.1
Recording Serial Numbers
1022835
A
Figure 4.1: Windrower Serial Number Location
1.
Record the windrower and engine serial numbers on
the
Predelivery Checklist, page 129
.
The windrower serial number plate (A) is located on the
left side of the main frame near the walking beam
as shown.
2.
Confirm serial number with manifest or work order.
1022836
A
Figure 4.2: Engine Serial Number Location
The engine serial number plate (A) is located on top of
the engine cylinder head cover as shown.
