214735
17
Revision A
3
Assembling the Windrower
Perform all procedures in this chapter in the order in which they are listed.
3.1
Lowering Steps
Lowering the steps allows safe and easy access to the cab where some assembly hardware was stored for
shipping purposes.
Lower steps from shipping position to working position as follows:
NOTE:
Left side shown, right side opposite.
1014559
A
C
B
Figure 3.1: Left Step
–
Shipping Position
1.
Remove stop bolt (A) and discard.
2.
Loosen pivot bolts (B) at both sides of step (C).
1014555
A
B
C
1014555
A
B
C
1014555
A
B
C
Figure 3.2: Left Step
–
Working Position
3.
Lower step (A) to working position.
4.
Ensure clips (B) are engaged in step.
5.
Tighten pivot bolts (C) to 90
–
100 Nm (66
–
73 lbf·ft).