214735
107
Revision A
4.6
Checking Header Settings
1018929
A
B
Figure 4.137: Header Settings
1.
Navigate to SETTINGS menu with soft key 5 and
Harvest Performance Tracker (HPT) scroll knob. Refer
to
Navigating the Harvest Performance Tracker, page
if required.
2.
Scroll to SET-UP HEADER option (A) and select it.
3.
Scroll to highlight appropriate item and select it.
4.
Scroll to highlight appropriate option and select it.
•
Example: If a draper header is attached, and
ATTACHMENTS (B) is selected, the available choice
is DOUBLE DRAPER DRIVE.
5.
Scroll to highlight appropriate item and select it.
6.
After completing the SETTINGS, proceed to
Calibrating the Windrower and Header, page 108
, and
4.8 Calibrating Windrower Knife Drive on Harvest
Performance Tracker (HPT) Display, page 111