1. Measure the clearance at locations (A) between the
reel and endsheets. The clearances should be the
same if the reel is centered. If not centered, continue
on the next step.
Figure 5.15: Single Reel Measurement
Locations
2. Loosen bolt (A) on the brace (B) at both ends of
the reel.
3. Move the forward end of the reel support arm (C)
laterally as required, to center the reel.
4. Tighten bolts (A) and torque to 359 N
·
m (265 lbf
·
ft).
Figure 5.16: Reel Support Arm
214047
56
Revision A
