3.4 Connecting Hydraulics
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all (
fi
xed
and movable) hydraulic couplers.
1. Move arm (B) toward left cab-forward side of
windrower.
2. Remove all remaining ties and shipping wire from hose
management arm.
Figure 3.26: Hydraulic Hose Management Arm
3. Ensure cab door is closed on the left cab-forward side
of the windrower.
4. Push latch (B), and pull platform (A) toward walking
beam until it stops and latch engages.
Figure 3.27: Platform
5. Unhook hoses from arm assembly.
6. Connect hydraulic hose management arm (A) to
windrower by securing the ball joint (B) on arm into the
latch support (C) on windrower leg.
Figure 3.28: Windrower Left Leg
214047
27
Revision A
