4.3 Attaching Cam Arms
To attach the reel cam arms, follow these steps:
1. Rotate the reel manually until the tine bars with
disconnected cam links are accessible.
2. Remove shipping wire (A) (if not already removed).
Figure 4.21: Disconnected Cam Links and
Shipping Wire
3. Remove bag of hardware (A) from tine bar. It contains
hardware for cam links and endshields.
Figure 4.22: Hardware Bag Right-Hand Reel
4. Rotate tine bar crank (A) and position link (B) so
attachment holes in bar crank are aligned with hole
in link.
5. Install bolt (C) in link and position shim (D) on bolt so
that shim is between link and tine bar crank.
NOTE:
Bolts are pre-coated with Loctite
®
, so no further
locking method is required.
6. Realign link (B) and tine bar crank (A) and thread in
bolt (C).
7. Repeat for remaining tine bars and torque bolts to
165 N·m (120 lbf·ft).
Figure 4.23: Bar Crank Attachment Holes and
Link Alignment
214047
40
Revision A
