4.4 Installing Crop Dividers
One crop and two rod dividers are stored on the right inboard side of the endsheet; the other crop divider is stored
on the left inboard side of the endsheet.
1. Remove the shipping wire (A) and loosen the bolt (B)
on the lock tab securing the divider rods (C) to the
bracket storage.
2. Remove divider rods (C) from the bracket storage (D)
and set aside for installation later.
3. Return lock tab to its original position and tighten
bolt (B).
Figure 4.24: Crop Divider on Endsheet
4. Support the crop divider, remove shipping wire (A) at
front end, and remove bolt (B).
5. Remove bolt and washer (C).
Figure 4.25: Crop Divider on Endsheet
6. Position crop divider as shown and insert lugs (A) into
slots (B) in endsheet.
Figure 4.26: Crop Divider Lugs and
Endsheet Slots
214047
41
Revision A
