Item
Reference
Check if reel lift cylinders extend fully.
—
Check if reel moves fully fore and aft.
—
Post run-up check. Stop engine.
7 Performing Post Run-Up Adjustments, page 77
Check belt drives for heated bearings.
5.4 Checking and Adjusting Knife Drive Belt
Tension, page 51
Check knife sections for discoloration caused by
misaligned components.
Check for hot spots on the cutterbar above the draper
seal. Adjust deck height as required.
5.7 Checking and Adjusting Draper Seal, page
59
Check for hydraulic leaks.
—
Check that manual storage case contains operator’s
manual and parts catalog.
5.13 Checking Manuals, page 73
Date checked:
Checked by:
214047
98
Revision A
