5 Performing Predelivery Checks
This machine has been set at the factory and should not require further adjustments; however, the following
checks will ensure your machine provides maximum performance. If adjustments are necessary, follow the
procedures in this chapter.
WARNING
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
before making adjustments to machine.
IMPORTANT:
To avoid machine damage, check that no shipping material has fallen into the machine.
1. Perform the
fi
nal checks as listed on the
Predelivery Checklist
(yellow sheet attached to this instruction –
Predelivery Checklist, page 97
) to ensure the machine is
fi
eld-ready. Refer to the following pages for detailed
instructions as indicated on the Checklist. The completed Checklist should be retained either by the Operator
or the Dealer.
5.1 Checking Tire Pressure: Transport and Stabilizer Wheels
Check tire in
fl
ation pressure. If necessary, in
fl
ate tires according to the following table:
Table 5.1 Tire In
fl
ation Pressure
Tire
Size
Pressure
Goodyear Wrangler RT/S
205/75 R15
276 kPa (40 psi)
Carlisle and Titan
ST205/75 R15
448 kPa (65 psi)
IMPORTANT:
Do
NOT
exceed maximum pressure speci
fi
ed on tire sidewall.
214047
47
Revision A