2.3 Removing Shipping Supports
NOTE:
Unless otherwise speci
fi
ed, discard all shipping materials
and hardware.
1. Cut straps and remove draper header supports (A)
from shipping support. Set draper header supports
aside for reinstallation.
Figure 2.12: Straps, Draper Header Supports,
and Shipping Supports
2.
Single reel only:
Cut banding (A) securing reel to
cutterbar and backtube.
Figure 2.13: Single Reel
3. Remove four bolts (A) securing upper support (B) to
header legs and remove support.
Figure 2.14: Upper Support
214047
13
Revision A
