5.12 Lubricating the Header
Table 5.4 Recommended Lubricant
Speci
fi
cation
Description
Use
High temperature, extreme pressure (EP2) performance
with 1% max molybdenum disulphide (NLGI Grade 2)
lithium base
As required unless
otherwise speci
fi
ed
SAE multipurpose
High temperature, extreme pressure (EP) performance
with 10% max molybdenum disulphide (NLGI Grade 2)
lithium base
Driveline slip-joints
5.12.1 Greasing Procedure
Greasing points are marked on the machine by decals showing a grease gun and grease interval in hours of
operation. Master grease point location decals are provided on the header.
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator’s seat for any reason.
214047
69
Revision A
