215651
239
Revision B
5.10
Transport System (Option)
Refer to
6.3.4 Stabilizer Wheels and Transport Package, page 250
for more information.
5.10.1
Checking Wheel Bolt Torque
If a transport system is installed, follow these steps to torque the wheel bolts. Wheel bolt torque should be checked 1 hour
after installation and every 100 hours thereafter.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key before making adjustments to the machine.
1.
Shut down the engine, and remove the key from the ignition.
Figure 5.255: Bolt Tightening Sequence
2.
Follow the bolt tightening sequence shown, and torque the
wheel bolts to 110
–
120 Nm (80
–
90 lbf
∙
ft).
IMPORTANT:
Whenever a wheel is removed and reinstalled, check the
wheel bolt torque after 1 hour of operation and every 100
hours thereafter.
5.10.2
Checking Axle Bolt Torque
If a transport system is installed, do the following steps to torque the axle bolts:
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key before making adjustments to the machine.
