215651
96
Revision B
%
&
'
$
Figure 3.71: Rear Wheels
12. Pull pin (A) on the right axle, swivel the wheel
counterclockwise to the position shown, and lock with
pin (A).
13. Remove hairpin (B) from latch (C).
14. Lift the wheel, lift latch (C), and engage lug (D) onto the left
axle. Ensure the latch closes.
15. Secure the latch with hairpin (B), ensuring the open end of
the pin faces the rear of the windrower.
IMPORTANT:
Check that the wheels are locked and that the handle is in
the locked position.
NOTE:
The hairpin can become dislodged by crop if it is installed
with the open end facing the cutterbar.
%
$
Figure 3.72: Field Position
16. Complete the conversion by ensuring left wheels (A) and
right wheels (B) are in the position shown.
3.15.4
Converting from Field to Transport Position
To convert from field position to transport position, follow all the recommended procedures provided here.
Moving Front (Left) Wheels into Transport Position
Perform the following procedure to move the front (left) wheels into transport position.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine,
remove the key, and engage the safety props before going under the header for any reason.
CAUTION
Stand clear of the wheels and release the linkage carefully; the wheels will drop suddenly once the mechanism is
released.
