215651
107
Revision B
$
%
&
'
(
Figure 4.6: Draper/Reel Multicoupler
6.
Check the connectors and ensure they are clean before
connecting the hydraulics and electrical harnesses.
7.
Retrieve draper drive and reel control multicoupler (A) from
the hydraulic hose management system.
8.
Push knob (B) on the hydraulic receptacle and pull
handle (C) fully away from the windrower.
9.
Open cover (D) and position the coupler onto the
receptacle. Align the pins in the coupler with slots in
handle (C), and push the handle toward the windrower so
that coupler is locked onto the receptacle and knob (B)
snaps out.
10. Remove the cover from electrical connector (E), push the
electrical connector onto the receptacle, and secure by
turning the collar on the electrical connector clockwise.
$
%
&
'
Figure 4.7: Knife/Reel Drive Multicoupler
11. Retrieve knife and reel drive multicoupler (A) from the
hydraulic hose management system.
12. Push knob (B) on the hydraulic receptacle and pull
handle (C) fully away from the windrower.
13. Open cover (D) and position the coupler onto the
receptacle. Align the pins in the coupler with slots in
handle (C) and push the handle toward the windrower so
that the coupler is locked onto the receptacle and knob (B)
snaps out.
Figure 4.8: Left Windrower Platform
14. Swing the left windrower platform forward. For
instructions, refer to the windrower operator
’
s manual.