215651
216
Revision B
%
&
$
Figure 5.199: Tail End
8.
Install bolts (A) securing tine tube arm (B) to the
center disc.
9.
Install tine tube arm (B) and endshield support (C) to the
tail end of the reel at the applicable tine tube location and
secure with bolts (A).
NOTE:
There are no endshields on the center discs.
$
Figure 5.200: Cam End
10. Install endshield support (A) at the applicable tine tube
location at the cam end.
11. Reinstall the reel endshields. For instructions, refer to
Replacing Reel Endshields, page 220
.
Center disc and tail end bushings
$
%
Figure 5.201: Cam End
12. Position bushing halves (B) on tine tube (A) with the
flangeless end adjacent to the tine tube arm, and position
the lug in each bushing half into the hole in the tine tube.
13. Slide tine tube (A) onto bushing (B) and position against the
disc at the original location.
14. Reinstall the previously removed fingers. For instructions,
refer to:
•
Removing Plastic Fingers, page 206
•
