215651
210
Revision B
Cam end bushings
$
Figure 5.183: Cam End
10. Remove the endshields and endshield support (A) from the
applicable tine tube location on the cam end.
NOTE:
Removing cam end bushings requires the tine tube to be
moved through the disc arms to expose the bushing.
%
&
$
Figure 5.184: Tail End
11. Remove the reel endshields and endshield support (C) from
the tail end of the reel at the applicable tine tube location.
NOTE:
There are no endshields on the center disc.
12. Remove bolts (A) securing tine tube arms (B) to the tail and
center discs.
Tine tube reinforcing kit (option)
%
$
Figure 5.185: Tine Tube Supports
13. Release the bushing clamps or disconnect the support
channels from the tine tube support (if installed) depending
on which tine tube is being moved. Three tine tubes (A)
require channel disconnection and two tine tubes (B)
require only bushing clamp removal.
