© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-30 - [email protected] - www.malighting.com
1
After the Fixtures have been inserted into the Pixel Mapper, they can be selected by a rubber-band, moved and
rotated, just as in the VPU Pixel Mapper editor.
Use the top-line buttons select / move to change mouse behavior.
To allow editing, activate the Setup button in the headline of the window.
Also the encoder bar can be used to change these values.
The Grid View shows the numerical representation of the mapped fixtures:
VPU Pixel Mapper View - Grid View
The grid mode shows all the options of each panel (the abstraction of fixtures and channels in the Pixel Mapper
Editor) in a tabular view.
Values can also be edited here, too. To send the data via MA-Net2, select the protocol in the options of the Output
and enable the Pixel Mapper Main Render flag.
A maximum of 256 universes can be send, and all 3 protocols share the same amount.
Hint:
So e.g. you can send 200 universes of MA-Net2, 20 Universes Art-Net and 36 Universes sACN.
MA-Net2 is put out on Ethernet1, sACN and Art-Net are put out on Ethernet 2(on a VPU).
To send the Pixel Mapper data back into the console, no additional Ethernet cable is required.
170 of 218
grandMA2 User Manual - Pixel Mapper
Version 3.4 – 2018-07-25
English