Lynx BRP REX2 49 RANGER 600HO E-TEC, Operator'S Manual

Page: 89 / 173

RIDING CONDITIONS AND YOUR SNOWMOBILE
Altitude
At factory, your snowmobile was cal-
ibrated to be used within an altitude
range (height above the sea level). For
your model's factory calibration, refer
to the following table.
MODEL FACTORY CALIBRATION
All Models
Sea level up to 600 m
(2,000 ft)
If your snowmobile is to be used at an
altitude outside the specified range,
have it calibrated accordingly by an au-
thorized Lynx dealer.
NOTICE
An inappropriate altitude
calibration would decrease perfor-
mance and may cause serious dam-
age to the snowmobile.
Temperature
The engine management of these en-
gines provides the optimum air/fuel ra-
tio for all temperatures.
Hard Packed Snow
Models Equipped with Minimum
Track Profile of 1.75 in
BRP does not recommend to ride a
snowmobile equipped with high lug
profile track at
high speed in a trail, on
hard packed surfaces or ice for an ex-
tended period of time.
In the event that you have to, reduce
your speed , then minimize the dis-
tance you ride on those surfaces.
NOTICE
Running those tracks at
high speed in a trail, on hard packed
surfaces or ice put more stress on
the lugs, which tend to heat up as a
result. To avoid potential degrada-
tion or damage to the track, reduce
your speed, then minimize the dis-
tance you ride on those surfaces.
86
______________