Lynx BRP REX2 49 RANGER 600HO E-TEC, Operator'S Manual

Page: 46 / 173

CONTROLS, INSTRUMENTS AND EQUIPMENT
KEY TYPE COLOR
Normal Gray
Learning Green
The Lynx learning key, limits the speed
of the snowmobile and the engine
torque, therefore enabling first time
users and less experienced operators
to learn how to operate the snowmo-
bile while gaining the necessary confi-
dence and control.
NOTE: The initial learning key pro-
gramming can limit the speed
to 40 km/h (25 MPH) or 70 km/h
(43 MPH). Refer to your authorized
Lynx dealer to modify this setting.
Refer to OPERATING MODES
subsec-
tion for details.
6) Emergency Engine
Stop Switch
The emergency engine stop switch is
located on the RH side of handlebar.
Use the emergency stop switch to
stop engine in a emergency situation.
To stop the engine, push switch down
(OFF position).
mmo2016-008-202_a
OFF POSITION
To allow engine starting, the switch
must be in the ON position (UP).
mmo2016-008-201_a
ON POSITION
All operators of the snowmobile
should familiarize themselves with the
function of the emergency engine stop
switch by using it several times on first
outing and whenever stopping the en-
gine thereafter. This engine stopping
procedure will become a reflex and will
prepare operators for emergency situ-
ations requiring its use.
WARNING
If the switch has been used in an
emergency caused by a suspected
malfunction, the source of the mal-
function should be determined
and corrected before restarting
engine. See an authorized Lynx
dealer for servicing.
7) Multifunction Switch
Multifunction switch is located on the
LH side of handlebar.
_______________
43