Lynx BRP REX2 49 RANGER 600HO E-TEC, Operator'S Manual, Page: 59 / 173

CONTROLS, INSTRUMENTS AND EQUIPMENT
See table below for usual pilot lamps information. Refer to
MONITORING SYS-
TEM
for details on malfunction pilot lamps.
PILOT
LAMP(S)
ON
BEEPER MESSAGE DISPLAY DESCRIPTION
4 short
beeps
every
5 minutes
LOW OIL
E-TEC: Injection oil level is low. Stop vehicle in a safe
place then, replenish injection oil reservoir.
— —
Low fuel level. One (1) bar left in fuel level display.
Replenish fuel tank as soon as possible.
Long
beeps
repeating
slowly
REVERSE Reverse is selected.
3 short
beeps
REV. FAIL Reverse did not engage, try again.
— —
High beam headlights are selected.
— —
WARM UP
E-TEC: Engine and/or injection oil need to warm-up before
normal operation. The engine's RPM is limited until
desired temperature is reached (up to 10 minutes when
driving). Warm-up period may occur after a restart in very
cold weather.
ACE Models
— —
ECO mode is selected.
— —
Standard mode is selected.
SPORT
MODE
— —
Sport mode is selected.
5) MODE (M) Button
Button use to navigate in gauge multi-
function display.
NOTE: MODE (M) button on the multi-
switch housing has the same functions
and can also be used.
6) SET (S) Button
Button used to navigate, adjust or re-
set gauge multifunction display.
In order to memorize settings, engine
must be running.
NOTE: SET (S) button on the multi-
function switch has the same func-
tions and can also be used.
56
______________