Lynx BRP REX2 49 RANGER 600HO E-TEC, Operator'S Manual, Page: 73 / 173

CONTROLS, INSTRUMENTS AND EQUIPMENT
fmo2014-002-008_a
SLIDE TOWARDS FRONT
Upper Body Module Installation
1. Insert the upper body module tabs
into the upper bottom pan open-
ings.
fmo2014-002-004_a
1. Upper body module tab
2. Upper bottom pan opening
2. Slide the module towards rear.
fmo2014-002-008_b
SLIDE TOWARDS REAR
3. On both sides, install the upper body
module retaining screws.
fmo2014-002-005_a
RH SIDE SHOWN
1. Retaining screws
E-TEC Models
4. Connect:
– APS hose on the ECM
– Headlights connector
– Gauge connector
– Air temperature sensor (ATS)
– Air intake connector tube.
ACE Models
5. Connect:
– Headlights connector
– Gauge connector
– Air intake connector tube.
70
______________