Lynx BRP REX2 49 RANGER 600HO E-TEC, Operator'S Manual

Page: 55 / 173

CONTROLS, INSTRUMENTS AND EQUIPMENT
PILOT
LAMP(S)
ON
BEEPER DESCRIPTION
4 short
beeps every
5 minutes
Injection oil level is low. Stop vehicle in a safe place
then, replenish injection oil reservoir.
—
Low fuel level. One (1) bar left in fuel level display.
Replenish fuel tank as soon as possible.
Long beeps
repeating slowly
Reverse is selected.
3 short beeps Reverse did not engage, try again.
—
High beam headlights are selected.
— —
E-TEC: Engine and/or injection oil need to warm-up
before normal operation. The engine's RPM is limited
until desired temperature is reached.
5) SET (S) Button
Button used to navigate, adjust or re-
set gauge multifunction display.
In order to memorize settings, engine
must be running.
NOTE: SET (S) button on the multi-
function switch has the same func-
tions and can also be used.
Gauge Features
GAUGE FEATURES
FUNCTIONS 600 HO E-TEC
A) Odometer
X
B) Trip meter
“A” or “B”
X
C) Trip hour
meter
X
D) Fuel level X
E) Engine Coolant Temperature (1) X
F) Engine Storage Mode X
X = An X indicates a standard feature
Opt = Feature available as an option
N.A. = Not available
(1) Coolant temperature is an option package. See a Lynx dealer for more information
NOTE: The display is factory preset in
Metric units but it is possible to change
it to Imperial units, contact an autho-
rized Lynx dealer for unit settings.
52
______________