Lynx BRP REX2 49 RANGER 600HO E-TEC, Operator'S Manual

Page: 102 / 173

MAINTENANCE SCHEDULE (E-TEC)
EVERY 6 000 KM (4,000 MI) OR 2 YEARS
(WHICHEVER COMES FIRST)
ENGINE
Clean and lubricate rewind starter
Inspect fuel pump strainer and replace if necessary
FUEL
SYSTEM
Inspect throttle cable
Replace brake fluid
DRIVE
SYSTEM
Replace the following drive pulley wear parts: slider shoes, O-rings
and sliding sheave bushing (E-TEC)
SUSPENSION Check PPS2 bushing and bearing. Replace both if either one is worn.
EVERY 10 000 KM (6,000 MI) OR 3 YEARS
(WHICHEVER COMES FIRST)
E-TEC: Inspect oil pump strainer and clean if needed
ENGINE
Clean 3D rave valves
DRIVE
SYSTEM Replace the following drive pulley wear parts: spring cover bushing
and ramps (E-TEC)
ELECTRICAL
SYSTEM
E-TEC: Replace spark plugs
EVERY 5 YEARS
ENGINE Replace engine coolant
FUEL
SYSTEM
Replace in-line fuel filter ( E-TEC )
_______________
99