Lynx BRP REX2 49 RANGER 600HO E-TEC, Operator'S Manual

Page: 72 / 173

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmr2008-010-004_a
Step 1: Lift tab
Step 2: Twist tube
Step 3: Pull forward
7. Disconnect air temperature sensor
(ATS) on top of connector tube.
mbl2012-008-003_a
1. ATS connector (Air Temperature Sensor)
8. Disconnect the APS hose at the
ECM.
mbl2012-008-004_a
1. ECM
2. APS hose
ACE Models
9. Pull backward the air intake tube.
fmo2014-002-034_a
1. Air intake tube
All Models
10. Remove the six upper body mod-
ule retaining screws, three on each
side.
fmo2014-002-005_a
RH SIDE SHOWN
1. Retaining screws
11. Tilt the upper body module 5 de-
grees up towards the top section
and then push it towards the front
of the vehicle.
12. Remove the upper body module.
_______________
69