Lynx BRP REX2 49 RANGER 600HO E-TEC, Operator'S Manual

Page: 18 / 173

RIDING THE VEHICLE
2. Check the engine cut-off switch (by
pulling tether cord cap) and emer-
gency engine stop switch opera-
tion.
3. Release parking brake.
4. Refer to the
VEHICLE WARM UP
section and follow instructions.
Pre-Ride Check List
ITEM OPERATION
✔
BODY INCLUDING SEAT,
FOOTRESTS, LIGHTS, AIR
FILTER, CONTROLS AND
INSTRUMENTS
Check condition and remove snow or ice.
SKIS AND STEERING ACTION Check for free movement and proper operation.
FUEL AND INJECTION OIL (IF
APPLICABLE)
Check for proper level and no leaks.
COOLANT Check for proper level and no leaks.
BRAKE FLUID Check for proper level and no leaks.
STORAGE COMPARTMENT
Check for proper latching and no heavy or
breakable objects.
TRACK
Check condition and remove snow or ice.
For studded tracks, see
INSPECTION in the
TRACTION ENHANCING PRODUCTS
subsection.
THROTTLE LEVER Check for proper operation.
BRAKE LEVER
Check for proper operation.
PARKING BRAKE, BRAKE Check for proper operation.
EMERGENCY ENGINE STOP
SWITCH AND ENGINE
CUT-OFF SWITCH (TETHER
CORD CAP)
Check for proper action. Tether cord must be
attached to operator clothing eyelet.
LIGHTS Check for proper operation.
SKI RUNNERS Check for proper operation.
SLIDER SHOES Check for proper operation.
DRIVE BELT Check for cracks, fraying or abnormal wear.
How to Ride
Riding Gear
Proper snowmobile clothing should
be worn. It should be comfortable
and not too tight. Always check the
weather forecast before going on a
ride. Dress for the coldest weather
expected. Thermal underwear next to
the skin also provides a good insula-
tion.
Wear an approved helmet at all times
for safety and comfort. They pro-
vide both warmth and reduce injury.
A stocking type cap, balaclava and
________
SAFETY INFORMATION
________
15