Lyngdorf Audio MP-60 – Owner’s manual
22
Adjust Sub
As the subwoofers are handling the bass information from multiple speaker channels, it is essential that the
subwoofer(s) are aligned with each other and with the relevant speaker channels. Without alignment you risk
having an inferior performance due to stress on the subwoofer’s internal amplifier.
With one or more active subwoofer(s) connected to the MP-60, this menu will guide you into setting the
volume level on each subwoofer’s controls. Follow the instructions on the display to go through two phases:
1. Find the correct
system volume
to do the Subwoofer adjustment (tones through speakers)
2. Adjust the volume setting
on each subwoofer
for the RoomPerfect™ calibration.
Verify Speakers
This function will allow you to test if the amplifiers and speakers are connected correctly to the outputs of the
MP-60. Follow the directions on the screen.
Channel Gain
This menu will allow you to change the level of each speaker individually – and in its relations to the decoded
signal. This means that if you prefer that a speaker is too low in level with DOLBY and DTS decoded
material, you can adjust this without affecting the level of the speaker, when playing an Auro decoded
material. If you activate Show RP Level, you will see, how the RoomPerfect™ calibration has corrected each
speaker channel.
