Lyngdorf Audio MP-60 – Owner’s manual
16
Speakers and Room
You need to configure the MP-60 according to your speaker setup, setting the sizes of the speakers, so that
the Bass Management function can optimize the overall performance. In the setup page the connectors will
be highlighted with information as to signal type.
In the web interface the designation of the output can be grey text instead of white to
indicate that these outputs are not native but generated by the processor.
The purpose of the speaker setup is to tell the system which speakers and subwoofers are available and
how big they are, which in turn reveals how much bass the speakers are capable of reproducing (Bass cutoff
frequency). The bass for each speaker channel is directed to the optimal subwoofer(s) connected.
References to “speakers” in this document are specific to satellite or full-range speakers and do not include
subwoofers. As factory default the MP-60 is displaying a 7.1 speaker configuration as shown below:
The setup page is an overview of the possible speaker outputs, which you can activate.
