Lyngdorf Audio MP-60 – Owner’s manual
24
•
If the woofers are lower than the listening position, measure the distance from the listening position to
the top dust cap of the top woofer.
How to Set Up RoomPerfect™
The RoomPerfect™ microphone is a very sensitive and finely calibrated device which
must be treated with utmost care. If the microphone has been dropped on the floor, it
may be damaged. If this is the case, obtain a new microphone from your Lyngdorf Audio
representative before performing the system calibration.
RoomPerfect™ Preparations
•
Place the RoomPerfect
TM
calibration microphone on the stand. Be sure to fasten the screws properly so
the microphone does not move during a measurement.
•
Plug the supplied microphone cable into the microphone.
•
Connect the microphone cable to the microphone terminal on the rear panel of your processor
Each RoomPerfect™ microphone is calibrated within very small parameters and using a
new microphone does not require adding any calibration file. The microphone does not
work with traditional power supply, and it cannot be replaced by any other microphone
design.
Placing the Microphone in the Focus Position
When you are prompted to place the microphone in the focus position, place the microphone, using the
microphone stand, in your primary listening position. The height and the orientation of the microphone should
correspond to your head’s height and direction.
