Lyngdorf Audio MP-60 – Owner’s manual
32
Video Setup
The Video Setup menu allows you to register the video system settings for the MP-60’s video inputs and
outputs, which in turn dictates which video formats can be shown on the screen when these inputs and
outputs are activated.
With a single TV/Projector these settings are set automatically.
As a rule of thumb, don´t make changes if you are not familiar with the consequences,
and always make a backup first!
Video Output
This menu manages the default and preferred setting for all video outputs.
Set the main video output of your device
Here you select which of the HDMI output connectors or the HDBaseT output is to be your output for the
main setup. Other outputs can be set to ‘follow main’ or be set individually to stream video from a specific
HDMI input connector.
The MP-60 features eARC (Enhanced Audio Return Channel), which will allow the
television to send a Dolby Atmos encoded audio track back through the HDMI cable
coming from the MP-60. eARC will only function on the HDMI 1 output.
The MP-60 features an internal HDMI matrix, why it is possible to control all three outputs
via a control system in order to select individual audio and video information to be
distributed to other televisions.
Default Video source
Here you set the output to be ‘independent’ of other outputs, ‘follow main’ or fixed at a given HDMI input.
HDMI Audio out
Here you select ‘Pass-through’ to have an audio output related to the video input output or not. Alternatively,
you can select the output for connecting audio through a HDMI cable to the Zone B.
