Lyngdorf Audio MP-60 – Owner’s manual
23
RoomPerfect™
RoomPerfect™ is designed to analyze and correct for the negative effects that the listening room has on the
speaker sound. See our website
www.lyngdorf.com
for more detailed information.
Global filter
The global filter improves sound quality across the whole room. When you are moving
around a room, the global filter gives the best result.
Focus position
The focus filter improves the sound quality at a specific listening position. This makes the focus filter the best
solution for optimal sound quality at a single listening position.
It is possible to add multiple focus positions. This must be done after RoomPerfect™ has
been set up completely.
Initial setup
Be sure to select the unit of measure, then enter the distances to the speakers and woofers.
How to measure distances to speakers and woofers
The best results are obtained by using a laser-equipped measuring device. Before starting, place the
RoomPerfect™ microphone at listening height in the main listening position. For each channel, measure the
straight-line distance through the air from the tip of the RoomPerfect™ microphone to the center of the
tweeter unit in the loudspeaker in question. Do not measure distances at floor level, as these measurements
will not give acoustically accurate results.
When measuring distances to
in-room
woofers:
•
If the woofer(s) is in the corner of the room, measure the distance to the corner of the room.
•
If the woofer(s) is up against the wall, measure the distance from the listening position to the back edge
of the woofer.
•
If you have a stack of woofers taller than the listening position, measure the distance from the listening
position to the back edge of the middle of the stack.
When measuring distances to
in-wall
woofers:
•
If the stack of woofers is taller than the listening position, measure the distance from the listening
position to the dust cap of the middle of the stack of woofers.
