Lyngdorf Audio MP-60 – Owner’s manual
28
System Configuration
General Setup
Power management
•
Choose the standby mode
o
Deep sleep – The MP-60 can only be turned on via the front on/off switch (Default)
o
Network Stand-By - The MP-60 can also be turned on via web interface, Remote App. or a
control system.
•
Choose the delay before auto off (minutes). Setting it to 0 will disable the feature.
Default volume settings
•
Set a max volume for the device (dB). This setting is a safety precaution.
•
Set startup volume
o
Use last volume – Sets the volume to be the same as when the MP-60 was turned off.
o
Use fixed volume – Sets the default volume at startup.
HDMI CEC settings
Set enable CEC and use ARC channel as audio input to Off or On.
Display timeout
Set seconds before turning off the display.
Password protection
Set a required password to enter the web setup section.
Show bypass
Set the RoomPerfect™ bypass mode for your device to Off or On.
Enable front IR sensor
Turn the MP-60´s IR sensor Off or On. This function is useful if you are using a home automation system and
other remotes are using the same IR codes as the MP-60 remote.
OSD info level
Choose the level of information to show on the OSD.
