background image

®

Lutron Electronics Co., Inc.

One Year Limited Warranty

  For a period of one year from the date of purchase, and subject 

to the exclusions and restrictions described below, Lutron warrants 

each new unit to be free from manufacturing defects.  Lutron will, 

at its option, either repair the defective unit or issue a credit equal 

to the purchase price of the defective unit to the Customer against 

the purchase price of comparable replacement part purchased 

from Lutron.  Replacements for the unit provided by Lutron or, at its 

sole discretion, an approved vendor may be new, used, repaired, 

reconditioned, and/or made by a different manufacturer.  

  If the unit is commissioned by Lutron or a Lutron approved third 

party as part of a Lutron commissioned lighting control system, the 

term of this warranty will be extended, and any credits against the 

cost of replacement parts will be prorated, in accordance with the 

warranty issued with the commissioned system, except that the 

term of the unit’s warranty term will be measured from the date of 

its commissioning.

EXCLUSIONS AND RESTRICTIONS 

This Warranty does not cover, and Lutron and its suppliers are not 

responsible for:

1.   Damage, malfunction or inoperability diagnosed by Lutron or 

a Lutron approved third party as caused by normal wear and 

tear, abuse, misuse, incorrect installation, neglect, accident, 

interference or environmental factors, such as (a) use of 

incorrect line voltages, fuses or circuit breakers; (b) failure to 

install, maintain and operate the unit pursuant to the operating 

instructions provided by Lutron and the applicable provisions 

of the National Electrical Code and of the Safety Standards 

of Underwriter’s Laboratories; (c) use of incompatible devices 

or accessories; (d) improper or insufficient ventilation; (e) 

unauthorized repairs or adjustments; (f) vandalism; or (g) an act 

of God, such as fire, lightning, flooding, tornado, earthquake, 

hurricane or other problems beyond Lutron’s control.

2.   On-site labor costs to diagnose issues with, and to remove, 

repair, replace, adjust, reinstall and/or reprogram the unit or any 

of its components.

3.   Equipment and parts external to the unit, including those sold 

or supplied by Lutron (which may be covered by a separate 

warranty).

4.   The cost of repairing or replacing other property that is damaged 

when the unit does not work properly, even if the damage was 

caused by the unit.

  EXCEPT AS EXPRESSLY PROVIDED IN THIS WARRANTY, 

THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OF ANY 

TYPE, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR 

A PARTICULAR PURPOSE OR MERCHANTABILITY.  LUTRON 

DOES NOT WARRANT THAT THE UNIT WILL OPERATE WITHOUT 

INTERRUPTION OR BE ERROR FREE.  

  NO LUTRON AGENT, EMPLOYEE OR REPRESENTATIVE HAS 

ANY AUTHORITY TO BIND LUTRON TO ANY AFFIRMATION, 

REPRESENTATION OR WARRANTY CONCERNING THE UNIT.  

UNLESS AN AFFIRMATION, REPRESENTATION OR WARRANTY 

MADE BY AN AGENT, EMPLOYEE OR REPRESENTATIVE IS 

SPECIFICALLY INCLUDED HEREIN, OR IN STANDARD PRINTED 

MATERIALS PROVIDED BY LUTRON, IT DOES NOT FORM A 

PART OF THE BASIS OF ANY BARGAIN BETWEEN LUTRON AND 

CUSTOMER AND WILL NOT IN ANY WAY BE ENFORCEABLE BY 

CUSTOMER.

  IN NO EVENT WILL LUTRON OR ANY OTHER PARTY BE LIABLE 

FOR EXEMPLARY, CONSEQUENTIAL, INCIDENTAL OR SPECIAL 

DAMAGES (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR 

LOSS OF PROFITS,  CONFIDENTIAL OR OTHER INFORMATION, OR 

PRIVACY; BUSINESS INTERRUPTION; PERSONAL INJURY; FAILURE 

TO MEET ANY DUTY, INCLUDING OF GOOD FAITH OR OF 

REASONABLE CARE; NEGLIGENCE, OR ANY OTHER PECUNIARY 

OR OTHER LOSS WHATSOEVER), NOR FOR ANY REPAIR WORK 

UNDERTAKEN WITHOUT LUTRON’S WRITTEN CONSENT ARISING 

OUT OF OR IN ANY WAY RELATED TO THE INSTALLATION, 

DEINSTALLATION, USE OF OR INABILITY TO USE THE UNIT OR 

OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION 

OF THIS WARRANTY, OR ANY AGREEMENT INCORPORATING 

THIS WARRANTY, EVEN IN THE EVENT OF THE FAULT, TORT 

(INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF 

CONTRACT OR BREACH OF WARRANTY OF LUTRON OR ANY 

SUPPLIER, AND EVEN IF LUTRON OR ANY OTHER PARTY WAS 

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

  NOTWITHSTANDING ANY DAMAGES THAT CUSTOMER 

MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, 

WITHOUT LIMITATION, ALL DIRECT DAMAGES AND ALL 

DAMAGES LISTED ABOVE), THE ENTIRE LIABILITY OF LUTRON 

AND OF ALL OTHER PARTIES UNDER THIS WARRANTY ON ANY 

CLAIM FOR DAMAGES ARISING OUT OF OR IN CONNECTION 

WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY, 

USE, REPAIR, OR REPLACEMENT OF THE UNIT, OR ANY 

AGREEMENT INCORPORATING THIS WARRANTY, AND 

CUSTOMER’S SOLE REMEDY FOR THE FOREGOING, WILL BE 

LIMITED TO THE AMOUNT PAID TO LUTRON BY CUSTOMER 

FOR THE UNIT. THE FOREGOING LIMITATIONS, EXCLUSIONS 

AND DISCLAIMERS WILL APPLY TO THE MAXIMUM EXTENT 

ALLOWED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS 

ITS ESSENTIAL PURPOSE. 

TO MAKE A WARRANTY CLAIM

  To make a warranty claim, promptly notify Lutron within the 

warranty period described above by calling the Lutron Technical 

Support Center at (800) 523-9466. Lutron, in its sole discretion, will 

determine what action, if any, is required under this warranty.  To 

better enable Lutron to address a warranty claim, have the unit’s serial 

and model numbers available when making the call. If Lutron, in its 

sole discretion, determines that an on-site visit or other remedial action 

is necessary, Lutron may send a Lutron Services Co. representative 

or coordinate the dispatch of a representative from a Lutron approved 

vendor to Customer’s site, and/or coordinate a warranty service call 

between Customer and a Lutron approved vendor.

 

This warranty gives you specific legal rights, and you may also 

have other rights which vary from state to state. Some states do 

not allow limitations on how long an implied warranty lasts, so the 

above limitation may not apply to you. Some states do not allow 

the exclusion or limitation of incidental or consequential damages, 

so the above limitation or exclusion may not apply to you.

 

Lutron, 

®

, Sivoia, Hi-lume, Eco-10, Tu-Wire, Pico, seeTouch, 

Quantum, and GRAFIK Eye are registered trademarks and Radio Powr 

Savr and Energi Savr Node are trademarks of Lutron Electron ics Co., Inc.  

 

© 2012 Lutron Electronics Co., Inc.

Internet: www.lutron.com

E-mail: [email protected]

WORLD HEADQUARTERS

USA

Lutron Electronics Co., Inc.

7200 Suter Road, Coopersburg, PA 18036-1299

TEL +1.610.282.3800

FAX +1.610.282.1243

Toll-Free 1.888.LUTRON1

Technical Support 1.800.523.9466

North and South America Technical Hotlines

USA, Canada, Caribbean: 1.800.523.9466

Mexico: +1.888.235.2910

Central/South America: +1.610.282.6701

EUROPEAN HEADQUARTERS

United Kingdom

Lutron EA Ltd.

6 Sovereign Close, London, E1W 3JF United Kingdom

TEL +44.(0)20.7702.0657

FAX +44.(0)20.7480.6899

FREEPHONE (UK) 0800.282.107

Technical s44.(0)20.7680.4481

ASIAN HEADQUARTERS

Singapore

Lutron GL Ltd. 

15 Hoe Chiang Road, #07-03, Tower 15,

 

Singapore 089316

TEL +65.6220.4666

FAX +65.6220.4333

New Delhi, India

Lutron GL Ltd. 

Level 4, Rectangle One, Commercial Complex D4

Saket, New Delhi 110017 India

TEL +91.11.4051.4300

FAX +91.11.4051.4052

Asia Technical Hotlines

Northern China: 10.800.712.1536

Southern China: 10.800.120.1536

Hong Kong: 800.901.849

Indonesia: 001.803.011.3994

Japan: +81.3.5575.8411

Macau: 0800.401

Singapore: 800.120.4491

Taiwan: 00.801.137.737

Thailand: 001.800.120.665853

Other countries: +65.6220.4666

Warranty

Lutron Electronics Co., Inc.

P/N 032-351 Rev. B  02/2012

Contact Information

Summary of Contents for QSGR-3PCE





















Reviews: