![background image](http://html1.mh-extra.com/html/lutron-electronics/qsgr-3pce/qsgr-3pce_quick-installation-and-operation-manual_1950661009.webp)
®
Completing Installation of the GRAFIK Eye
®
QS Control Unit
1. Mount the control unit in the wallbox as
shown using the four screws pro vid ed.
Note:
Follow all local and national
electrical codes when installing IEC
PELV wiring with line voltage/mains
wiring.
2. Verify installation:
•
Restore power.
•
Press the top scene button. The LED will
light.
•
Press the zone raise and lower buttons.
Make sure the control unit is dimming all
connected loads.
3. Apply the protective overlay to the control
unit.
Note:
When tightening mounting
screws, make sure that the
hinged cover and faceplate
will open fully, as shown.
Wall
200 mm
87 mm
95 mm
Protective overlay
(apply after installation)
For additional information, see the complete installation and operation guide at
www.lutron.com/qs
GRAFIK Eye
®
QS Control Unit Quick Installation and Operation Guide 9