![background image](http://html1.mh-extra.com/html/lutron-electronics/qsgr-3pce/qsgr-3pce_quick-installation-and-operation-manual_1950661011.webp)
®
For additional information, see the complete installation and operation guide at
www.lutron.com/qs
GRAFIK Eye
®
QS Control Unit Quick Installation and Operation Guide 11
Wireless Mode
Many models of the GRAFIK Eye
®
QS control unit support wireless communication with
other Lutron
®
products. This feature allows for easy integration of wireless sensors,
keypads, remotes, and window treatments for single-room wireless applications.
Units supporting wireless communication are labeled “GRAFIK Eye
®
QS Wireless” on
the front label of the unit.
The wireless feature of the GRAFIK Eye
®
QS Wireless control unit has three (3) modes
of operation.
•
Disabled:
Use for wired-only systems.
•
Enabled:
The GRAFIK Eye
®
QS Wireless control unit will respond to any programming
commands from nearby Lutron QS wireless (and compatible) products.
•
Ignore Programming (default):
The GRAFIK Eye
®
QS Wireless control unit will only
respond to normal operation commands from wireless devices associated while in
Enabled mode.
Changing the wireless mode of the GRAFIK Eye
®
QS Wireless control unit:
1. Enter programming mode.
2. Use the Master buttons to highlight “Wireless Mode” and press
the OK button to accept.
3. Use the Master buttons to highlight the desired wireless mode,
and press the OK button to accept.
4. The info screen will display a confirming “Saved” message.
5. Exit programming mode.
Note:
The wireless signal has a range of 9 m through standard
construction or 18 m line of sight.
Wireless Mode
Enabled
Saved
Saved
Main menu
Shade labels
Wireless Mode
OK
Master
buttons
OK
button
Timeclock
(back) button