![background image](http://html1.mh-extra.com/html/lutron-electronics/qsgr-3pce/qsgr-3pce_quick-installation-and-operation-manual_1950661013.webp)
®
For additional information, see the complete installation and operation guide at
www.lutron.com/qs
GRAFIK Eye
®
QS Control Unit Quick Installation and Operation Guide 13
Zone Setup (continued)
Load Type Notes
• All electronic low-voltage
(ELV) lighting used with an
interface must be rated for reverse
phase control dimming. Before
installing an ELV light source,
verify with the manufacturer that
their transformer can be dimmed.
When dimming, an ELV interface
(such as the NGRX-ELVI-CE-WH)
must be used with the control
unit.
• For all DMX or RGB/CMY DMX
lighting, an external DMX interface
(such as the QSE-CI-DMX) must
be used with the control unit.
Zone ratings:
• Not all zones must be connected;
however, connected zones must
have a minimum load of 40 W.
• Maximum loads:
10 A per unit
500 W per zone.
• Maximum total lighting load for a
magnetic low-voltage (MLV) load
is 500 VA / 400 W.
LUTRON
LUTRON
LUTRON
LUTRON
Setting Load Types
Direct control via
GRAFIK Eye
®
QS
control unit
Control via
power module or
interface
Fixture load type
Choose this load type from the menu
on the GRAFIK Eye
®
QS control unit:
Zones
1
–
6
Incandescent
Incandescent
Power module
MLV (magnetic low-voltage)
MLV
Power module
ELV (electronic low-voltage)
—
Power module
Hi-lume
®
/Eco-10
®
—
Fluorescent module
0-10 V
—
Fluorescent module
Non-dim lighting loads
Non-dim
Non-dim
Neon/Cold cathode
Neon, CC
Neon, CC
DMX
—
DMX
RGB/CMY DMX
—
RGB/CMY DMX
Power
module or
interface