ODiSI 6
ODiSI 6
User’s Guide
Page 75
Figure 7-2: ODiSI Remote Sensor Plot
The ODiSI Remote also provides the ability to Play Back test data files and Generate Test
Data TSV Files through the menu bar.
ODiSI Remote-control Interface
This section describes the commands (utilized internally by the ODiSI Remote application)
that facilitate remote-control of the ODiSI controller application. The remote-control interface
is a two-way interface in which the remote-control application sends a command and the
ODiSI controller application provides a status update in response. This remote-control
connection is facilitated over a TCP/IP network connection. Only one such active connection
can exist at one time. The ODiSI controller application will block any attempts to establish
additional simultaneous connections.
ODiSI Remote-control Commands
The following table describes the remote-control commands that can be sent after establishing
a connection.
Table 7-1 List of remote-control commands
Command
Description
remote:arm
Arm Test
remote:disarm
Disarm Test
remote:start
Start Test
