ODiSI 6
ODiSI 6
User’s Guide
Page 18
Figure 5-7: View strain along the length of the sensor
5.
Confirm that the measurement length matches the expected sensor length.
6.
Zero out residual strains along the sensor. Click on the “Save Tare”
button and give the Tare a name.
7.
Define additional Gages and Segments using Touch to Locate.
a.
Click on the
“Start Touch to Locate”
button.
b.
Apply a localized hot or cold touch to the sensor at the gage location of interest.
c.
A red vertical cursor will appear at the touch location.
d.
Click the
“Add Gage” button.
e.
Repeat the above steps for other gages of interest.
