ODiSI 6
ODiSI 6
User’s Guide
Page 49
Figure 6-27: Channel Settings dialog
Streaming Properties
Select the
Streaming Properties Settings menu by clicking “Settings → Streaming Properties”.
Figure 6-28: Streaming Properties menu item
ODiSI measurement data can be streamed to a separate remote PC for analysis and/or
storage. The ODiSI software uses a Luna defined JSON-formatted TCP/IP protocol called
ODiSI Measurement Streaming Protocol (OMSP) for data transfer. Details on this protocol
can be found in section
ODiSI Measurement Streaming Protocol (OMSP)
Luna also provides the ODiSI Remote application which gives the ability to Arm, Start, Stop,
and Disarm the ODiSI controller software from a remote PC as well as receive and display
live measurements from the ODiSI control software in real-time. The ODiSI Remote software
is covered in more detail in a later section.
Controller Host Name
: Displays the
Controller’s Host Name.
Controller IP Address
: Displays the
Controller’s IP Address. The controller needs to be
connected to a network prior to the ODiSI software being launched in order for the IP Address
to be detected and populated.
OMSP Enabled
: Check to stream measurement data.
