Lumenera Lt-C1610, User Manual

Page: 86 / 144

80 • Feature Reference Teledyne Lumenera Lt Series
5.8 Acquisition Control Category
This feature group includes controls for acquisition management. Parameters in gray are read-only,
either always or due to other feature settings. Parameters in black are user set.
Features listed in the description table that are tagged as Invisible are usually for third-party
software usage—not typically needed by end-user applications.
5.8.1 Acquisition Control Feature Descriptions
The following table describes the features and values found in the category, as well as the device
version and visibility level (beginner, expert, guru, invisible). The device version represents a
camera software functional level (different from the firmware revision number) and may differ for
each camera sensor. A major device version release is shown in green . The last column also
indicates whether the feature is a member of the DALSA Features Naming Convention (DFNC) or
the GenICam Standard Features Naming Convention (SFNC, tag not shown).
Display Name Feature & Values Description Device
Version
& View
Acquisition Mode AcquisitionMode Sets the acquisition mode of the device. It
defines mainly the number of frames to
capture during an acquisition and the way the
acquisition stops.
1.00
Beginner