Lumenera Lt-C1610, User Manual

Page: 68 / 144

62 • Feature Reference Teledyne Lumenera Lt Series
5.3 Sensor Control Category
The sensor control group has parameters such as frame rate, exposure time, exposure mode, gain,
etc. Parameters shown on screen in gray are read-only, either because they are always read-only
or due to other feature settings.
Features listed in the description table that are tagged as Invisible are usually for third-party
software usage—not typically needed by end-user applications. Note that features shown may
change with different camera models implementing different sensors, image resolutions and color
versions.
5.3.1 Sensor Control Feature Descriptions
The following table describes the features and values found in the category, as well as the device
version and visibility level (beginner, expert, guru, invisible). The device version represents a
camera software functional level (different from the firmware revision number) and may differ for
each camera sensor. A major device version release is shown in green . The last column also
indicates whether the feature is a member of the DALSA Features Naming Convention (DFNC) or
the GenICam Standard Features Naming Convention (SFNC, tag not shown).