Lumenera Lt-C1610, User Manual

Page: 77 / 144

Teledyne Lumenera Lt Series Feature Reference • 71
5.5.1 Advanced Processing Feature Descriptions
The following table describes the features and values found in the category, as well as the device
version and visibility level (beginner, expert, guru, invisible). The device version represents a
camera software functional level (different from the firmware revision number) and may differ for
each camera sensor. A major device version release is shown in green . The last column also
indicates whether the feature is a member of the DALSA Features Naming Convention (DFNC) or
the GenICam Standard Features Naming Convention (SFNC, tag not shown).
Display Name Feature & Values Description Device
Version
& View
Gamma Correction gammaCorrection Sets the gamma correction factor. The gamma
correction is applied as an inverse exponent to
the original pixel value.
1.00
DFNC
Expert
Contrast Correction contrastCorrection Sets the contrast correction factor. 1.00
DFNC
Expert
Brightness Correction brightnessCorrection Sets the brightness correction as a percentage. 1.00
DFNC
Expert
LUT Mode lutMode Sets the enable state of the LUT module
(Lookup Table).
1.00
DFNC
Expert
Off Off Disables the LUT.
Active Active Enables the LUT.
LUT Index LUTIndex Selects the index (offset) of the coefficient to
access in the selected LUT.
1.00
Guru
LUT Value LUTValue Returns the value at specified LUT index entry
of the LUT selected by the LUT Selector
feature.
1.00
Guru
LUT Value All LUTValueAll
Accesses all the LUT coefficients in a single
access without using individual LUT indices.
This feature accesses the LUT values in the
currently active LUT table set by the LUT
Current Active Set feature.
1.00
Guru
Balance White Auto BalanceWhiteAuto Controls the mode for automatic white
balancing between the color channels. The
white balancing ratios are automatically
adjusted.
1.00
Expert
Off Off White balancing is user controlled using
BalanceRatioSelector and BalanceRatio.
Continuous Continuous White balancing is constantly adjusted by the
device.
Balance Ratio Selector BalanceRatioSelector Selects which color gain is controlled with the
BalanceRatio feature.
1.00
Expert
Red Red RED gain is controlled by Balance Ratio.
Green Green GREEN gain is controlled by Balance Ratio.
Blue Blue BLUE gain is controlled by Balance Ratio.
Balance Ratio BalanceRatio Sets the digital gain of the selected color
component (BalanceRatioSelector).
1.00
Expert