Lumenera Lt-C1610, User Manual

Page: 18 / 144

12 • Series Specifications Teledyne Lumenera Lt Series
Electrical Interface
Input Voltage
5 V via power over USB or via external interface connector (Lt-Ux1x-xxxxx, Lt-Ux0x-
xxxxx series)
10 to 28 V via external interface connector only (Lt-Ux2x-xxxxx series)
Power Dissipation (typical) ~ 4 W (Lt-Ux0x-xxxxxx series)
~ 2.3 to 3.6 W (Lt-Ux1x-xxxxxx series)
~ 8 W (Lt-Ux20-xxxxx series)
Environmental Conditions
Operating Temperature
(at camera front plate) All Models: 0°C to +50°C
Any metallic camera mounting provides heat sinking, which consequently reduces the
internal temperature.
Operating Relative Humidity 5% to 90% non-condensing
Storage -30°C to +70°C
Conformity FCC Class B & CE Certified, RoHS & WEEE Compliant
Shock / Vibration EC60721-4-7 Class 7M2 & IEC60068-2-27
Sinusoidal & Random
Vibration
IEC60721-4-7 Class 7M2 & IEC60721-4-2 Class 2M2
IEC60068-2-6 & IEC60068-2-64
Case Protection Rating
IP50 (Optical Path) (Lt-Ux0x-xxxxx series)
IP40 (Optical Path) (Lt-Ux1x-xxxxx series)
IP40 for the Lt-Ux2x-xxxxx series
2.2 Sensor Cosmetic Specifications
After Factory Calibration and/or Corrections are applied (dependent on sensor)
Blemish Specifications Maximum Number of
Defects
Blemish Description
Hot/Dead Pixel defects
Typical 0.0025%
Max 0.005%
Any pixel that deviates by ±20% from the average of
neighboring pixels at 50% saturation including pixel stuck at 0
and maximum saturated value.
Spot defects None
Grouping of more than 8 pixel defects within a sub-area of 3x3
pixels, to a maximum spot size of 7x7 pixels.
Clusters defects None Grouping of more than 5 single pixel defects in a 3x3 kernel.
Column defects None
Vertical grouping of more than 10 contiguous pixel defects
along a single column.
Row defects None
Horizontal grouping of more than 10 contiguous pixel defects
along a single row.
Cleanliness Test conditions
•
Nominal light = illumination at 60% of saturation
• Camera temperature <= 55°C
•
At exposures lower than 0.1 seconds
•
At gain = 1
Defective Pixel Correction Test conditions
• Gray: illumination at 60% of saturation, gain = 1
• Black: gain = 15
•
Camera temperature = 50°C - 55°C