Lumenera Lt-C1610, User Manual

Page: 87 / 144

Teledyne Lumenera Lt Series Feature Reference • 81
Display Name Feature & Values Description Device
Version
& View
Continuous Continuous Frames are captured continuously until
stopped with the AcquisitionStop command.
Single Frame SingleFrame One frame is captured for each
AcquisitionStart Command. An AcquisitionStop
occurs at the end of the Active Frame.
Multi-Frame MultiFrame A sequence of frames is captured for each
AcquisitionStart Command. The number of
frames is specified by AcquisitionFrameCount
feature. An AcquisitionStop occurs at the end
of the Active Frame(s).
Acquisition Frame
Count
AcquisitionFrameCount
Number of frames to be acquired in
MultiFrame acquisition mode.
1.00
Beginner
Burst Count AcquisitionBurstFrameCount Number of consecutive snapshots to acquire
on cameras that support fast multiple
snapshots.
1.00
Guru
Acquisition Start AcquisitionStart Starts the Acquisition of the device. The
number of frames captured is specified by
AcquisitionMode.
1.00
Beginner
Acquisition Stop AcquisitionStop Stops the Acquisition of the device at the end
of the current Frame.
1.00
Beginner
Acquisition Abort CMD AcquisitionAbort Aborts the acquisition immediately. This will
end the capture without completing the
current frame or aborts waiting on a trigger. If
no acquisition is in progress, the command is
ignored.
1.00
Beginner
Device Registers
Streaming Start
DeviceRegistersStreamingStart Announces the start of registers streaming
without immediate checking for consistency.
1.00
Invisible
Device Registers
Streaming End
DeviceRegistersStreamingEnd Announces end of registers streaming and
performs validation for registers consistency
before activating them.
1.00
Invisible
Registers Check DeviceRegistersCheck
Performs an explicit register set validation for
consistency.
1.00
Invisible
Registers Valid DeviceRegistersValid States if the current register set is valid and
consistent.
1.00
Invisible