Lumenera Lt-C1610, User Manual

Page: 71 / 144

Teledyne Lumenera Lt Series Feature Reference • 65
5.4 I/O Control Category
The I/O control has features used to configure external trigger and line inputs plus strobe output
configuration. Parameters in gray are read-only, either always or due to another parameter being
disabled. Parameters in black are user set or programmable via an imaging application.
Features listed in the description table but tagged as Invisible are usually for third-party software
usage—not typically needed by end-user applications. Note that cameras are available in a number
of models implementing different sensors which may support different features within this
category.
5.4.1 I/O Control Feature Descriptions
The following table describes the features and values found in the category, as well as the device
version and visibility level (beginner, expert, guru, invisible). The device version represents a
camera software functional level (different from the firmware revision number) and may differ for
each camera sensor. A major device version release is shown in green . The last column also
indicates whether the feature is a member of the DALSA Features Naming Convention (DFNC) or
the GenICam Standard Features Naming Convention (SFNC, tag not shown).